diff --git a/pinning/hardware/clt_atmega32.m4 b/pinning/hardware/clt_atmega32.m4
new file mode 100644
index 0000000..103b4b9
--- /dev/null
+++ b/pinning/hardware/clt_atmega32.m4
@@ -0,0 +1,13 @@
+/* port the enc28j60 is attached to */
+pin(SPI_CS_NET, SPI_CS_HARDWARE)
+
+ifdef(`conf_ONEWIRE', `dnl
+ /* onewire support */
+ pin(ONEWIRE, PD7)
+')dnl
+
+ifdef(`conf_ECMD_SERIAL_USART_SUPPORT', `dnl
+ /* USART support */
+ pin(ECMD_SERIAL_USART_TX, PD1)
+')dnl
+
diff --git a/pinning/hardware/clt_atmega644.m4 b/pinning/hardware/clt_atmega644.m4
new file mode 100644
index 0000000..103b4b9
--- /dev/null
+++ b/pinning/hardware/clt_atmega644.m4
@@ -0,0 +1,13 @@
+/* port the enc28j60 is attached to */
+pin(SPI_CS_NET, SPI_CS_HARDWARE)
+
+ifdef(`conf_ONEWIRE', `dnl
+ /* onewire support */
+ pin(ONEWIRE, PD7)
+')dnl
+
+ifdef(`conf_ECMD_SERIAL_USART_SUPPORT', `dnl
+ /* USART support */
+ pin(ECMD_SERIAL_USART_TX, PD1)
+')dnl
+
diff --git a/scripts/Menuconfig b/scripts/Menuconfig
index 0d349c5..7e7bebb 100644
--- a/scripts/Menuconfig
+++ b/scripts/Menuconfig
@@ -1062,6 +1062,8 @@ Select the default profile you wish to load. \
ethersex "Standard Ethersex" 0 \
bootloader "Ethernet Bootloader" 0 \
netio "Pollin AVR Net-IO" 0 \
+ clt_atmega32 "Chemnitzer Linux-Tage 2010 - ATmega32" 0 \
+ clt_atmega644 "Chemnitzer Linux-Tage 2010 - ATmega644" 0 \
radig "Radig AVR Webmodul" 0 \
fimser "Fieldday Instant Messenger" 0 \
probot "Conrad Probot" 0 \
diff --git a/scripts/profiles/clt_atmega32 b/scripts/profiles/clt_atmega32
new file mode 100644
index 0000000..a2cda34
--- /dev/null
+++ b/scripts/profiles/clt_atmega32
@@ -0,0 +1,503 @@
+#
+# Automatically generated by make menuconfig: don't edit
+#
+
+#
+# General Setup
+#
+CONFIG_EXPERIMENTAL=y
+ARCH=ARCH_AVR
+ARCH_AVR=y
+# ARCH_HOST is not set
+# atmega8 is not set
+# atmega88 is not set
+# atmega128 is not set
+# atmega16 is not set
+# atmega162 is not set
+# atmega168 is not set
+MCU=atmega32
+atmega32=y
+# atmega64 is not set
+# atmega644 is not set
+# atmega644p is not set
+FREQ=11059200
+# Arduino_Duemilanove is not set
+# Jackalope is not set
+# MicroWebServer is not set
+# conrad_probot is not set
+# etherrape is not set
+# generic_usb_teensy is not set
+HARDWARE=clt
+clt=y
+# other is not set
+# pollin_funkevalboard is not set
+# radig_web is not set
+# sexyfnord is not set
+# user_fnordhw is not set
+# SRAM_SUPPORT is not set
+# SRAM_MEMTEST_ON_BOOT is not set
+# BOOTLOADER_SUPPORT is not set
+# TEENSY_SUPPORT is not set
+# SPI_TIMEOUT is not set
+# USART_SPI_SUPPORT is not set
+# USE_GIT_VERSION is not set
+VERSION_STRING_CHOICE=USE_RELEASE_VERSION
+USE_RELEASE_VERSION=y
+# USE_BUILDDATE_VERSION is not set
+# DEBUG_DISCARD_SOME is not set
+# DEBUG is not set
+DEBUG_BAUDRATE=115200
+# DEBUG_USE_SYSLOG is not set
+# SOFT_UART_SUPPORT is not set
+# DEBUG_HOOK is not set
+# DEBUG_RESET_REASON is not set
+# STATUSLEDS is not set
+# STATUSLED_POWER_SUPPORT is not set
+# STATUSLED_BOOTED_SUPPORT is not set
+# STATUSLED_NETLINK_SUPPORT is not set
+# STATUSLED_TX_SUPPORT is not set
+# RFM12_TX_PIN is not set
+# ZBUS_TX_PIN is not set
+# STATUSLED_RX_SUPPORT is not set
+# RFM12_RX_PIN is not set
+# ZBUS_RX_PIN is not set
+# CRYPTO_SUPPORT is not set
+# CAST5_SUPPORT is not set
+# MD5_SUPPORT is not set
+# SHA1_SUPPORT is not set
+VFS_SUPPORT=y
+# VFS_DF_SUPPORT is not set
+VFS_INLINE_SUPPORT=y
+# CONFIG_INLINE_SUPPORT is not set
+# VFS_CONFIG_INLINE_SUPPORT is not set
+# RFM12_INLINE_SUPPORT is not set
+# I2C_INLINE_SUPPORT is not set
+VFS_IO_INLINE_SUPPORT=y
+# KTY_INLINE_SUPPORT is not set
+ADC_INLINE_SUPPORT=y
+ONEWIRE_INLINE_SUPPORT=y
+# CAMERA_INLINE_SUPPORT is not set
+# NAMED_PIN_INLINE_SUPPORT is not set
+# STELLA_INLINE_SUPPORT is not set
+# MSR1_INLINE_SUPPORT is not set
+# TO1_INLINE_SUPPORT is not set
+# MCUF_INLINE_SUPPORT is not set
+# GAME_INPUT_INLINE_SUPPORT is not set
+# UPNP_INLINE_SUPPORT is not set
+# LCD_INLINE_SUPPORT is not set
+# NMEA_INLINE_SUPPORT is not set
+# PWM_SERVO_INLINE_SUPPORT is not set
+# DEBUG_INLINE_DUMMY is not set
+# DEBUG_INLINE_GZ is not set
+# DEBUG_INLINE_DISABLE_GZ is not set
+# VFS_HOST_SUPPORT is not set
+# VFS_SD_SUPPORT is not set
+# SD_READER_SUPPORT is not set
+# SD_READ_TIMEOUT is not set
+# SD_PING_READ is not set
+# VFS_EEPROM_SUPPORT is not set
+# VFS_EEPROM_RAW_SUPPORT is not set
+# VFS_DC3840_SUPPORT is not set
+# DATAFLASH_SUPPORT is not set
+# DEBUG_FS is not set
+# DEBUG_FS_INODETABLE is not set
+# DEBUG_FS_MARK is not set
+# VFS_EEPROM_DEBUG_SUPPORT is not set
+# DEBUG_SD_READER is not set
+# PAM_SUPPORT is not set
+# CONTROL6_SUPPORT is not set
+
+#
+# Network
+#
+CONF_HOSTNAME="LinuxTage"
+ENC28J60_SUPPORT=y
+CONF_ENC_MAC="00:22:f9:01:0c:65"
+# IPV6_STATIC_SUPPORT is not set
+CONF_ENC_IP="192.168.1.10"
+CONF_ENC_IP4_NETMASK="255.255.255.0"
+# IEEE8021Q_SUPPORT is not set
+# DEBUG_ENC28J60 is not set
+# DEBUG_INTERRUPT is not set
+# DEBUG_REV4_WORKAROUND is not set
+ETHERNET_SUPPORT=y
+# TAP_SUPPORT is not set
+CONF_TAP_MAC="ac:de:48:fd:0f:d0"
+# IPV6_STATIC_SUPPORT is not set
+CONF_TAP_IP="192.168.23.244"
+CONF_TAP_IP4_NETMASK="255.255.255.0"
+CONF_TAP_LOCALIP="192.168.23.1"
+# IEEE8021Q_SUPPORT is not set
+# RFM12_IP_SUPPORT is not set
+CONF_RFM12_FREQ=RFM12_FREQ_433920
+RFM12_FREQ_433920=y
+# RFM12_FREQ_869775 is not set
+# RFM12_FREQ_869800 is not set
+# RFM12_FREQ_869825 is not set
+# RFM12_FREQ_869850 is not set
+# RFM12_FREQ_869875 is not set
+# RFM12_FREQ_869900 is not set
+# RFM12_FREQ_869925 is not set
+# CONF_RFM12_SLOW_SPI is not set
+CONF_RFM12_BAUD=19200
+CONF_RFM12_IP="192.168.5.1"
+CONF_RFM12_IP4_NETMASK="255.255.255.0"
+# RFM12_SOURCE_ROUTE_ALL is not set
+# RFM12_PCKT_FWD is not set
+# RFM12_ARP_PROXY is not set
+# RFM12_RAW_SUPPORT is not set
+# USB_SUPPORT is not set
+# USB_CFG_IS_SELF_POWERED is not set
+USB_CFG_MAX_BUS_POWER=20
+# USB_NET_SUPPORT is not set
+# ZBUS_SUPPORT is not set
+# ZBUS_RAW_SUPPORT is not set
+# ROUTER_SUPPORT is not set
+UIP_SUPPORT=y
+NET_SUPPORT=y
+# IPV6_SUPPORT is not set
+IPV4_SUPPORT=y
+# IP_FORWARDING_SUPPORT is not set
+# UIP_TIMEOUT_SUPPORT is not set
+CONF_ETHERRAPE_GATEWAY="192.168.0.1"
+# UIP_MULTI_STACK is not set
+# IPCHAIR_SUPPORT is not set
+# IPCHAIR_MASQ is not set
+TCP_SUPPORT=y
+# UDP_SUPPORT is not set
+# BROADCAST_SUPPORT is not set
+ICMP_SUPPORT=y
+# DNS_SUPPORT is not set
+CONF_DNS_SERVER="192.168.23.254"
+# BOOTP_SUPPORT is not set
+# BOOTP_TO_EEPROM_SUPPORT is not set
+# OPENVPN_SUPPORT is not set
+CONF_OPENVPN_KEY=00000000000000000000000000000000
+CONF_OPENVPN_HMAC_KEY=00000000000000000000000000000000
+CONF_OPENVPN_IP="0.0.0.0"
+CONF_OPENVPN_IP4_NETMASK="255.255.255.0"
+# OPENVPN_STATIC_REMOTE is not set
+# DEBUG_NET is not set
+# DEBUG_NET_CONFIG is not set
+# DEBUG_NET_IP6 is not set
+# DEBUG_OPENVPN is not set
+# DEBUG_ROUTER is not set
+# DEBUG_UIP is not set
+# DEBUG_NTP is not set
+# DEBUG_UNKNOWN_PACKETS is not set
+
+#
+# I/O
+#
+# CONFIG_IO_NONE is not set
+PORTIO_SCHEME=PORTIO_SIMPLE
+PORTIO_SIMPLE=y
+# PORTIO_FULL_FEATURED is not set
+# NAMED_PIN_SUPPORT is not set
+# TTY_SUPPORT is not set
+TTY_COLS=16
+TTY_LINES=4
+# TTY_LL_HD44780 is not set
+# TTY_LL_S1D15G10 is not set
+# TTY_LL_VT100_TELNET is not set
+# DEBUG_TTY_LAYER is not set
+# HC595_SUPPORT is not set
+HC595_REGISTERS=5
+# HC165_SUPPORT is not set
+# HC165_INVERSE_OUTPUT is not set
+HC165_REGISTERS=1
+ADC_SUPPORT=y
+CONFIG_ADC_AREF=y
+# CONFIG_ADC_AVCC is not set
+# CONFIG_ADC_1_1 is not set
+# CONFIG_ADC_2_56 is not set
+ADC_REF=ADC_AREF
+# SMS_SUPPORT is not set
+SMS_USART_0=y
+# DEBUG_SMS is not set
+# KTY_SUPPORT is not set
+# TLC5620_SUPPORT is not set
+# LTC1257_SUPPORT is not set
+
+#
+# LCD Displays
+#
+# HD44780_SUPPORT is not set
+# HD44780_READBACK is not set
+# S1D15G10_SUPPORT is not set
+# ST7626_SUPPORT is not set
+# DEBUG_HD44780 is not set
+# DEBUG_LCD_MENU is not set
+# I2C_MASTER_SUPPORT is not set
+# I2C_DETECT_SUPPORT is not set
+# I2C_24CXX_SUPPORT is not set
+# I2C_LM75_SUPPORT is not set
+# I2C_PCA9531_SUPPORT is not set
+# I2C_PCF8574X_SUPPORT is not set
+# I2C_UDP_SUPPORT is not set
+# DEBUG_I2C is not set
+# CAMERA_SUPPORT is not set
+# DC3840_SUPPORT is not set
+# CONFIG_DC3840_RES80 is not set
+# CONFIG_DC3840_RES160 is not set
+# CONFIG_DC3840_RES320 is not set
+# CONFIG_DC3840_RES640 is not set
+# DC3840_HIGH_COMPRESSION is not set
+# DC3840_BLACK_WHITE is not set
+DC3840_USART_0=y
+DC3840_USE_USART=0
+# FS20_SUPPORT is not set
+# FS20_SEND_SUPPORT is not set
+# FS20_RECEIVE_SUPPORT is not set
+# FS20_RECEIVE_WS300_SUPPORT is not set
+# DEBUG_FS20_REC is not set
+# DEBUG_FS20_REC_QUEUE is not set
+# DEBUG_FS20_REC_VERBOSE is not set
+# DEBUG_FS20_WS300 is not set
+# DEBUG_FS20_WS300_VERBOSE is not set
+# RC5IR_SUPPORT is not set
+# RC5_SUPPORT is not set
+# DEBUG_RC5 is not set
+# PSB2186_SUPPORT is not set
+# PWM_SUPPORT is not set
+# PWM_WAV_SUPPORT is not set
+# PWM_MELODY_SUPPORT is not set
+# PWM_SERVO_SUPPORT is not set
+PWM_SERVOS=1
+# PWM_SERVO_INVERT is not set
+# DEBUG_PWM is not set
+# DEBUG_PWM_SERVO is not set
+ONEWIRE_SUPPORT=y
+ONEWIRE_DETECT_SUPPORT=y
+# ONEWIRE_DS2502_SUPPORT is not set
+# PS2_SUPPORT is not set
+# PS2_GERMAN_LAYOUT is not set
+# DEBUG_PS2 is not set
+# BUTTONS_INPUT_SUPPORT is not set
+CONF_NUM_BUTTONS=
+# GAME_INPUT_SUPPORT is not set
+# JOYSTICK_DIGITAL_SUPPORT is not set
+# DEBUG_JOYSTICK_DIGITAL is not set
+# DEBUG_GAME_INPUT is not set
+# RFM12_ASK_SUPPORT is not set
+# RFM12_ASK_SENDER_SUPPORT is not set
+# RFM12_ASK_2272_SUPPORT is not set
+# RFM12_ASK_TEVION_SUPPORT is not set
+# RFM12_ASK_EXTERNAL_FILTER_SUPPORT is not set
+# RFM12_ASK_SENSING_SUPPORT is not set
+# DEBUG_ASK_SENSE is not set
+# MCUF_SUPPORT is not set
+# MCUF_SERIAL_SUPPORT is not set
+MCUF_USART_0=y
+# MCUF_OUTPUT_SUPPORT is not set
+# BLP_SUPPORT is not set
+# LEDRG_SUPPORT is not set
+# MCUF_SERIAL_WORKAROUND_FOR_BAD_MCUF_UDP_PACKETS is not set
+# MCUF_SCROLLTEXT_SUPPORT is not set
+CONF_MCUF_SCROLLTEXT_STARTUP="Hi I am your ethersex ;-) "
+CONF_MCUF_SCROLLTEXT_STARTUP_COLOR=240
+CONF_MCUF_SCROLLTEXT_STARTUP_BG_COLOR=1
+CONF_MCUF_SCROLLTEXT_STARTUP_SPEED=2
+# MCUF_CLOCK_SUPPORT is not set
+# MCUF_MODUL_SUPPORT is not set
+# MCUF_MODUL_CRON_SUPPORT is not set
+# MCUF_MODUL_DISPLAY_MODE_CRON_SEQUENCE is not set
+MCUF_MODUL_DISPLAY_MODE_CRON=MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM
+MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM=y
+# MCUF_MODUL_DISPLAY_MODE_SUPPORT is not set
+# MCUF_MODUL_DISPLAY_MODE_SEQUENCE is not set
+MCUF_MODUL_DISPLAY_MODE=MCUF_MODUL_DISPLAY_MODE_RANDOM
+MCUF_MODUL_DISPLAY_MODE_RANDOM=y
+# MCUF_MODUL_DISPLAY_MODE_MANUAL is not set
+# MCUF_TEST_GAME_INPUT is not set
+# MCUF_CHESS_SUPPORT is not set
+# MCUF_BOX_SUPPORT is not set
+# MCUF_CLEAN_SUPPORT is not set
+# MCUF_SPIRAL_SUPPORT is not set
+# MCUF_IMAGE_SUPPORT is not set
+# MCUF_MODUL_BORG16_SUPPORT is not set
+# MCUF_MODUL_BORG16_XONI_STUDY_SUPPORT is not set
+# MCUF_MODUL_BORG16_SNAKE_SUPPORT is not set
+# MCUF_MODUL_BORG16_SNAKE_INTERACTIVE_SUPPORT is not set
+# DEBUG_MCUF is not set
+
+#
+# Protocols
+#
+# ARTNET_SUPPORT is not set
+CONF_ARTNET_PORT=6454
+CONF_ARTNET_MAX_PORTS=4
+CONF_ARTNET_MAX_DATA_LENGTH=511
+CONF_ARTNET_MAX_CHANNELS=512
+CONF_ARTNET_OEM_ID="0xB108"
+# DEBUG_ARTNET is not set
+# DMX_SUPPORT is not set
+CONF_DMX_MAX_CHAN=512
+DMX_USART_0=y
+ECMD_PARSER_SUPPORT=y
+# ALIASCMD_SUPPORT is not set
+# ECMD_PAM_SUPPORT is not set
+# ECMD_SCRIPT_SUPPORT is not set
+ECMD_SCRIPT_MAX_VARIABLES=4
+ECMD_SCRIPT_VARIABLE_LENGTH=10
+ECMD_SCRIPT_COMPARATOR_LENGTH=25
+ECMD_SCRIPT_MAXLINES=128
+ECMD_SERIAL_USART_SUPPORT=y
+ECMD_SERIAL_USART_USART_0=y
+ECMD_SERIAL_USART_USE_USART=0
+# ECMD_SERIAL_USART_RS485_SUPPORT is not set
+ECMD_SERIAL_BAUDRATE=115200
+ECMD_SERIAL_USART_BUFFER_LEN=50
+ECMD_TCP_SUPPORT=y
+ECMD_TCP_PORT=2701
+# ECMD_UDP_SUPPORT is not set
+# ECMD_SERIAL_I2C_SUPPORT is not set
+# ECMD_USB_SUPPORT is not set
+# ECMD_JABBER_SUPPORT is not set
+# ECMD_IRC_SUPPORT is not set
+# ECMD_SMS_SUPPORT is not set
+# ECMD_SENDER_SUPPORT is not set
+# UECMD_SENDER_SUPPORT is not set
+# DISABLE_IPCONF_SUPPORT is not set
+# DISABLE_REBOOT_SUPPORT is not set
+# IPSTATS_SUPPORT is not set
+# FREE_SUPPORT is not set
+# DEBUG_ECMD is not set
+# DEBUG_ECMD_FS20 is not set
+# DEBUG_ECMD_IP is not set
+# DEBUG_ECMD_MAC is not set
+# DEBUG_ECMD_NET is not set
+# DEBUG_ECMD_OW_LIST is not set
+# DEBUG_ECMD_OW_ROM is not set
+# DEBUG_ECMD_PORTIO is not set
+# DEBUG_ECMD_RC5 is not set
+# DEBUG_ECMD_SCRIPT is not set
+# IRC_SUPPORT is not set
+CONF_IRC_IP="192.168.23.254"
+CONF_IRC_PORT=6667
+CONF_IRC_CHANNEL="ethersex"
+CONF_IRC_USERNAME="ethersex"
+CONF_IRC_NICKNAME="ethersex"
+CONF_IRC_REALNAME="Ethersex Wollmilchsau"
+# IRC_GREET_SUPPORT is not set
+# DEBUG_IRC is not set
+# MDNS_SD_SUPPORT is not set
+# MODBUS_SUPPORT is not set
+# MYSQL_SUPPORT is not set
+CONF_MYSQL_IP="192.168.23.254"
+CONF_MYSQL_USERNAME="root"
+CONF_MYSQL_PASSWORD="password"
+CONF_MYSQL_SCHEMA="mavisdb"
+# DEBUG_MYSQL is not set
+# NETSTAT_SUPPORT is not set
+CONF_NETSTAT_SERVICE_IP="188.40.33.175"
+CONF_NETSTAT_SERVICE="ethersex.de"
+CONF_NETSTAT_API="/~habo/stat/"
+# DEBUG_NETSTAT is not set
+# SOAP_SUPPORT is not set
+# SNMP_SUPPORT is not set
+# SENDMAIL_SUPPORT is not set
+CONF_SENDMAIL_IP="78.47.210.246"
+CONF_SENDMAIL_FROM="root@sex.metafnord.de"
+CONF_SENDMAIL_TO="stesie@brokenpipe.de"
+# SENDMAIL_AUTH_SUPPORT is not set
+# DEBUG_SENDMAIL is not set
+# SMS77_SUPPORT is not set
+CONF_SMS77_SERVICE="gateway.sms77.de"
+CONF_SMS77_USER=""
+CONF_SMS77_PASS=""
+CONF_SMS77_TO=""
+# SMS77_EEPROM_SUPPORT is not set
+# DEBUG_SMS77 is not set
+# SYSLOG_SUPPORT is not set
+CONF_SYSLOG_SERVER="192.168.23.73"
+# TWITTER_SUPPORT is not set
+CONF_TWITTER_SERVICE="identi.ca"
+CONF_TWITTER_API="/api"
+CONF_TWITTER_USERNAME="ethersex"
+CONF_TWITTER_PASSWORD=""
+CONF_TWITTER_AUTH="ZXRoZXJzZXg6"
+# DEBUG_TWITTER is not set
+# USTREAM_SUPPORT is not set
+CONF_USTREAM_IP="205.188.234.7"
+CONF_USTREAM_PORT=80
+# DEBUG_USTREAM is not set
+# YPORT_SUPPORT is not set
+YPORT_USART_0=y
+YPORT_PORT=7970
+YPORT_BAUDRATE=115200
+# MSR1_SUPPORT is not set
+MSR1_USART_0=y
+# DEBUG_MSR1 is not set
+# TO1_SUPPORT is not set
+TO1_USART_0=y
+TO1_SENSOR_COUNT=1
+# DEBUG_TO1 is not set
+# NMEA_SUPPORT is not set
+NMEA_USART_0=y
+
+#
+# Applications
+#
+# APP_SAMPLE_SUPPORT is not set
+# APP_SAMPLE_INIT_AUTOSTART_SUPPORT is not set
+# APP_SAMPLE_PERIODIC_AUTOSTART_SUPPORT is not set
+# DEBUG_APP_SAMPLE is not set
+# CLOCK_SUPPORT is not set
+# CLOCK_DATETIME_SUPPORT is not set
+# CLOCK_CRYSTAL_SUPPORT is not set
+# CLOCK_NTP_ADJUST_SUPPORT is not set
+# DCF77_SUPPORT is not set
+# DEBUG_DCF77 is not set
+# NTP_SUPPORT is not set
+# NTPD_SUPPORT is not set
+# WHM_SUPPORT is not set
+# DEBUG_NTP_ADJUST is not set
+# CRON_SUPPORT is not set
+# CRON_DEFAULT_UTC is not set
+# CRON_SUPPORT_TEST is not set
+# DEBUG_CRON_DRYRUN is not set
+# DEBUG_CRON is not set
+# CRON_STATIC_SUPPORT is not set
+# DYNDNS_SUPPORT is not set
+# UDP_ECHO_NET_SUPPORT is not set
+# WOL_SUPPORT is not set
+HTTPD_SUPPORT=y
+# HTTPD_SOAP_SUPPORT is not set
+# HTTPD_AUTH_SUPPORT is not set
+# HTTP_SD_DIR_SUPPORT is not set
+# MIME_SUPPORT is not set
+HTTPD_PORT=80
+HTTPD_ALTERNATE_PORT=8000
+# DEBUG_HTTPD is not set
+# JABBER_SUPPORT is not set
+CONF_JABBER_IP="78.47.210.246"
+CONF_JABBER_HOSTNAME="jabber.zerties.org"
+CONF_JABBER_USERNAME="esex"
+CONF_JABBER_PASSWORD="password"
+CONF_JABBER_RESOURCE="ethersex"
+CONF_JABBER_BUDDY="stesie@jabber.zerties.org"
+# DEBUG_JABBER is not set
+# MOODLIGHT_SUPPORT is not set
+MOODLIGHT_THRESHOLD_INIT=120
+# MOODLIGHT_START_ONBOOT is not set
+# STELLA_SUPPORT is not set
+# STELLA_HIGHFREQ is not set
+STELLA_START=stella_start_zero
+stella_start_zero=y
+# stella_start_all is not set
+# stella_start_eeprom is not set
+STELLA_FADE_STEP_INIT=10
+STELLA_FADE_FUNCTION_INIT=stella_fade_func_0
+stella_fade_func_0=y
+# stella_fade_func_1 is not set
+# DEBUG_STELLA is not set
+# TFTP_SUPPORT is not set
+# TFTPOMATIC_SUPPORT is not set
+# UPNP_SUPPORT is not set
+CONF_UPNP_MULTICAST_IP="239.255.255.250"
+CONF_UPNP_SCHEME_FILENAME="/ih.xml"
+# DEBUG_UPNP is not set
+# WATCHCAT_SUPPORT is not set
+# RFM12_SUPPORT is not set
+IPV4_SUPPORT=y
diff --git a/scripts/profiles/clt_atmega644 b/scripts/profiles/clt_atmega644
new file mode 100644
index 0000000..de0bab6
--- /dev/null
+++ b/scripts/profiles/clt_atmega644
@@ -0,0 +1,503 @@
+#
+# Automatically generated by make menuconfig: don't edit
+#
+
+#
+# General Setup
+#
+CONFIG_EXPERIMENTAL=y
+ARCH=ARCH_AVR
+ARCH_AVR=y
+# ARCH_HOST is not set
+# atmega8 is not set
+# atmega88 is not set
+# atmega128 is not set
+# atmega16 is not set
+# atmega162 is not set
+# atmega168 is not set
+MCU=atmega644
+atmega644=y
+# atmega64 is not set
+# atmega644 is not set
+# atmega644p is not set
+FREQ=11059200
+# Arduino_Duemilanove is not set
+# Jackalope is not set
+# MicroWebServer is not set
+# conrad_probot is not set
+# etherrape is not set
+# generic_usb_teensy is not set
+HARDWARE=max
+max=y
+# other is not set
+# pollin_funkevalboard is not set
+# radig_web is not set
+# sexyfnord is not set
+# user_fnordhw is not set
+# SRAM_SUPPORT is not set
+# SRAM_MEMTEST_ON_BOOT is not set
+# BOOTLOADER_SUPPORT is not set
+# TEENSY_SUPPORT is not set
+# SPI_TIMEOUT is not set
+# USART_SPI_SUPPORT is not set
+# USE_GIT_VERSION is not set
+VERSION_STRING_CHOICE=USE_RELEASE_VERSION
+USE_RELEASE_VERSION=y
+# USE_BUILDDATE_VERSION is not set
+# DEBUG_DISCARD_SOME is not set
+# DEBUG is not set
+DEBUG_BAUDRATE=115200
+# DEBUG_USE_SYSLOG is not set
+# SOFT_UART_SUPPORT is not set
+# DEBUG_HOOK is not set
+# DEBUG_RESET_REASON is not set
+# STATUSLEDS is not set
+# STATUSLED_POWER_SUPPORT is not set
+# STATUSLED_BOOTED_SUPPORT is not set
+# STATUSLED_NETLINK_SUPPORT is not set
+# STATUSLED_TX_SUPPORT is not set
+# RFM12_TX_PIN is not set
+# ZBUS_TX_PIN is not set
+# STATUSLED_RX_SUPPORT is not set
+# RFM12_RX_PIN is not set
+# ZBUS_RX_PIN is not set
+# CRYPTO_SUPPORT is not set
+# CAST5_SUPPORT is not set
+# MD5_SUPPORT is not set
+# SHA1_SUPPORT is not set
+VFS_SUPPORT=y
+# VFS_DF_SUPPORT is not set
+VFS_INLINE_SUPPORT=y
+# CONFIG_INLINE_SUPPORT is not set
+# VFS_CONFIG_INLINE_SUPPORT is not set
+# RFM12_INLINE_SUPPORT is not set
+# I2C_INLINE_SUPPORT is not set
+VFS_IO_INLINE_SUPPORT=y
+# KTY_INLINE_SUPPORT is not set
+ADC_INLINE_SUPPORT=y
+ONEWIRE_INLINE_SUPPORT=y
+# CAMERA_INLINE_SUPPORT is not set
+# NAMED_PIN_INLINE_SUPPORT is not set
+# STELLA_INLINE_SUPPORT is not set
+# MSR1_INLINE_SUPPORT is not set
+# TO1_INLINE_SUPPORT is not set
+# MCUF_INLINE_SUPPORT is not set
+# GAME_INPUT_INLINE_SUPPORT is not set
+# UPNP_INLINE_SUPPORT is not set
+# LCD_INLINE_SUPPORT is not set
+# NMEA_INLINE_SUPPORT is not set
+# PWM_SERVO_INLINE_SUPPORT is not set
+# DEBUG_INLINE_DUMMY is not set
+# DEBUG_INLINE_GZ is not set
+# DEBUG_INLINE_DISABLE_GZ is not set
+# VFS_HOST_SUPPORT is not set
+# VFS_SD_SUPPORT is not set
+# SD_READER_SUPPORT is not set
+# SD_READ_TIMEOUT is not set
+# SD_PING_READ is not set
+# VFS_EEPROM_SUPPORT is not set
+# VFS_EEPROM_RAW_SUPPORT is not set
+# VFS_DC3840_SUPPORT is not set
+# DATAFLASH_SUPPORT is not set
+# DEBUG_FS is not set
+# DEBUG_FS_INODETABLE is not set
+# DEBUG_FS_MARK is not set
+# VFS_EEPROM_DEBUG_SUPPORT is not set
+# DEBUG_SD_READER is not set
+# PAM_SUPPORT is not set
+# CONTROL6_SUPPORT is not set
+
+#
+# Network
+#
+CONF_HOSTNAME="LinuxTage"
+ENC28J60_SUPPORT=y
+CONF_ENC_MAC="00:22:f9:01:0c:65"
+# IPV6_STATIC_SUPPORT is not set
+CONF_ENC_IP="192.168.1.10"
+CONF_ENC_IP4_NETMASK="255.255.255.0"
+# IEEE8021Q_SUPPORT is not set
+# DEBUG_ENC28J60 is not set
+# DEBUG_INTERRUPT is not set
+# DEBUG_REV4_WORKAROUND is not set
+ETHERNET_SUPPORT=y
+# TAP_SUPPORT is not set
+CONF_TAP_MAC="ac:de:48:fd:0f:d0"
+# IPV6_STATIC_SUPPORT is not set
+CONF_TAP_IP="192.168.23.244"
+CONF_TAP_IP4_NETMASK="255.255.255.0"
+CONF_TAP_LOCALIP="192.168.23.1"
+# IEEE8021Q_SUPPORT is not set
+# RFM12_IP_SUPPORT is not set
+CONF_RFM12_FREQ=RFM12_FREQ_433920
+RFM12_FREQ_433920=y
+# RFM12_FREQ_869775 is not set
+# RFM12_FREQ_869800 is not set
+# RFM12_FREQ_869825 is not set
+# RFM12_FREQ_869850 is not set
+# RFM12_FREQ_869875 is not set
+# RFM12_FREQ_869900 is not set
+# RFM12_FREQ_869925 is not set
+# CONF_RFM12_SLOW_SPI is not set
+CONF_RFM12_BAUD=19200
+CONF_RFM12_IP="192.168.5.1"
+CONF_RFM12_IP4_NETMASK="255.255.255.0"
+# RFM12_SOURCE_ROUTE_ALL is not set
+# RFM12_PCKT_FWD is not set
+# RFM12_ARP_PROXY is not set
+# RFM12_RAW_SUPPORT is not set
+# USB_SUPPORT is not set
+# USB_CFG_IS_SELF_POWERED is not set
+USB_CFG_MAX_BUS_POWER=20
+# USB_NET_SUPPORT is not set
+# ZBUS_SUPPORT is not set
+# ZBUS_RAW_SUPPORT is not set
+# ROUTER_SUPPORT is not set
+UIP_SUPPORT=y
+NET_SUPPORT=y
+# IPV6_SUPPORT is not set
+IPV4_SUPPORT=y
+# IP_FORWARDING_SUPPORT is not set
+# UIP_TIMEOUT_SUPPORT is not set
+CONF_ETHERRAPE_GATEWAY="192.168.0.1"
+# UIP_MULTI_STACK is not set
+# IPCHAIR_SUPPORT is not set
+# IPCHAIR_MASQ is not set
+TCP_SUPPORT=y
+# UDP_SUPPORT is not set
+# BROADCAST_SUPPORT is not set
+ICMP_SUPPORT=y
+# DNS_SUPPORT is not set
+CONF_DNS_SERVER="192.168.23.254"
+# BOOTP_SUPPORT is not set
+# BOOTP_TO_EEPROM_SUPPORT is not set
+# OPENVPN_SUPPORT is not set
+CONF_OPENVPN_KEY=00000000000000000000000000000000
+CONF_OPENVPN_HMAC_KEY=00000000000000000000000000000000
+CONF_OPENVPN_IP="0.0.0.0"
+CONF_OPENVPN_IP4_NETMASK="255.255.255.0"
+# OPENVPN_STATIC_REMOTE is not set
+# DEBUG_NET is not set
+# DEBUG_NET_CONFIG is not set
+# DEBUG_NET_IP6 is not set
+# DEBUG_OPENVPN is not set
+# DEBUG_ROUTER is not set
+# DEBUG_UIP is not set
+# DEBUG_NTP is not set
+# DEBUG_UNKNOWN_PACKETS is not set
+
+#
+# I/O
+#
+# CONFIG_IO_NONE is not set
+PORTIO_SCHEME=PORTIO_SIMPLE
+PORTIO_SIMPLE=y
+# PORTIO_FULL_FEATURED is not set
+# NAMED_PIN_SUPPORT is not set
+# TTY_SUPPORT is not set
+TTY_COLS=16
+TTY_LINES=4
+# TTY_LL_HD44780 is not set
+# TTY_LL_S1D15G10 is not set
+# TTY_LL_VT100_TELNET is not set
+# DEBUG_TTY_LAYER is not set
+# HC595_SUPPORT is not set
+HC595_REGISTERS=5
+# HC165_SUPPORT is not set
+# HC165_INVERSE_OUTPUT is not set
+HC165_REGISTERS=1
+ADC_SUPPORT=y
+CONFIG_ADC_AREF=y
+# CONFIG_ADC_AVCC is not set
+# CONFIG_ADC_1_1 is not set
+# CONFIG_ADC_2_56 is not set
+ADC_REF=ADC_AREF
+# SMS_SUPPORT is not set
+SMS_USART_0=y
+# DEBUG_SMS is not set
+# KTY_SUPPORT is not set
+# TLC5620_SUPPORT is not set
+# LTC1257_SUPPORT is not set
+
+#
+# LCD Displays
+#
+# HD44780_SUPPORT is not set
+# HD44780_READBACK is not set
+# S1D15G10_SUPPORT is not set
+# ST7626_SUPPORT is not set
+# DEBUG_HD44780 is not set
+# DEBUG_LCD_MENU is not set
+# I2C_MASTER_SUPPORT is not set
+# I2C_DETECT_SUPPORT is not set
+# I2C_24CXX_SUPPORT is not set
+# I2C_LM75_SUPPORT is not set
+# I2C_PCA9531_SUPPORT is not set
+# I2C_PCF8574X_SUPPORT is not set
+# I2C_UDP_SUPPORT is not set
+# DEBUG_I2C is not set
+# CAMERA_SUPPORT is not set
+# DC3840_SUPPORT is not set
+# CONFIG_DC3840_RES80 is not set
+# CONFIG_DC3840_RES160 is not set
+# CONFIG_DC3840_RES320 is not set
+# CONFIG_DC3840_RES640 is not set
+# DC3840_HIGH_COMPRESSION is not set
+# DC3840_BLACK_WHITE is not set
+DC3840_USART_0=y
+DC3840_USE_USART=0
+# FS20_SUPPORT is not set
+# FS20_SEND_SUPPORT is not set
+# FS20_RECEIVE_SUPPORT is not set
+# FS20_RECEIVE_WS300_SUPPORT is not set
+# DEBUG_FS20_REC is not set
+# DEBUG_FS20_REC_QUEUE is not set
+# DEBUG_FS20_REC_VERBOSE is not set
+# DEBUG_FS20_WS300 is not set
+# DEBUG_FS20_WS300_VERBOSE is not set
+# RC5IR_SUPPORT is not set
+# RC5_SUPPORT is not set
+# DEBUG_RC5 is not set
+# PSB2186_SUPPORT is not set
+# PWM_SUPPORT is not set
+# PWM_WAV_SUPPORT is not set
+# PWM_MELODY_SUPPORT is not set
+# PWM_SERVO_SUPPORT is not set
+PWM_SERVOS=1
+# PWM_SERVO_INVERT is not set
+# DEBUG_PWM is not set
+# DEBUG_PWM_SERVO is not set
+ONEWIRE_SUPPORT=y
+ONEWIRE_DETECT_SUPPORT=y
+# ONEWIRE_DS2502_SUPPORT is not set
+# PS2_SUPPORT is not set
+# PS2_GERMAN_LAYOUT is not set
+# DEBUG_PS2 is not set
+# BUTTONS_INPUT_SUPPORT is not set
+CONF_NUM_BUTTONS=
+# GAME_INPUT_SUPPORT is not set
+# JOYSTICK_DIGITAL_SUPPORT is not set
+# DEBUG_JOYSTICK_DIGITAL is not set
+# DEBUG_GAME_INPUT is not set
+# RFM12_ASK_SUPPORT is not set
+# RFM12_ASK_SENDER_SUPPORT is not set
+# RFM12_ASK_2272_SUPPORT is not set
+# RFM12_ASK_TEVION_SUPPORT is not set
+# RFM12_ASK_EXTERNAL_FILTER_SUPPORT is not set
+# RFM12_ASK_SENSING_SUPPORT is not set
+# DEBUG_ASK_SENSE is not set
+# MCUF_SUPPORT is not set
+# MCUF_SERIAL_SUPPORT is not set
+MCUF_USART_0=y
+# MCUF_OUTPUT_SUPPORT is not set
+# BLP_SUPPORT is not set
+# LEDRG_SUPPORT is not set
+# MCUF_SERIAL_WORKAROUND_FOR_BAD_MCUF_UDP_PACKETS is not set
+# MCUF_SCROLLTEXT_SUPPORT is not set
+CONF_MCUF_SCROLLTEXT_STARTUP="Hi I am your ethersex ;-) "
+CONF_MCUF_SCROLLTEXT_STARTUP_COLOR=240
+CONF_MCUF_SCROLLTEXT_STARTUP_BG_COLOR=1
+CONF_MCUF_SCROLLTEXT_STARTUP_SPEED=2
+# MCUF_CLOCK_SUPPORT is not set
+# MCUF_MODUL_SUPPORT is not set
+# MCUF_MODUL_CRON_SUPPORT is not set
+# MCUF_MODUL_DISPLAY_MODE_CRON_SEQUENCE is not set
+MCUF_MODUL_DISPLAY_MODE_CRON=MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM
+MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM=y
+# MCUF_MODUL_DISPLAY_MODE_SUPPORT is not set
+# MCUF_MODUL_DISPLAY_MODE_SEQUENCE is not set
+MCUF_MODUL_DISPLAY_MODE=MCUF_MODUL_DISPLAY_MODE_RANDOM
+MCUF_MODUL_DISPLAY_MODE_RANDOM=y
+# MCUF_MODUL_DISPLAY_MODE_MANUAL is not set
+# MCUF_TEST_GAME_INPUT is not set
+# MCUF_CHESS_SUPPORT is not set
+# MCUF_BOX_SUPPORT is not set
+# MCUF_CLEAN_SUPPORT is not set
+# MCUF_SPIRAL_SUPPORT is not set
+# MCUF_IMAGE_SUPPORT is not set
+# MCUF_MODUL_BORG16_SUPPORT is not set
+# MCUF_MODUL_BORG16_XONI_STUDY_SUPPORT is not set
+# MCUF_MODUL_BORG16_SNAKE_SUPPORT is not set
+# MCUF_MODUL_BORG16_SNAKE_INTERACTIVE_SUPPORT is not set
+# DEBUG_MCUF is not set
+
+#
+# Protocols
+#
+# ARTNET_SUPPORT is not set
+CONF_ARTNET_PORT=6454
+CONF_ARTNET_MAX_PORTS=4
+CONF_ARTNET_MAX_DATA_LENGTH=511
+CONF_ARTNET_MAX_CHANNELS=512
+CONF_ARTNET_OEM_ID="0xB108"
+# DEBUG_ARTNET is not set
+# DMX_SUPPORT is not set
+CONF_DMX_MAX_CHAN=512
+DMX_USART_0=y
+ECMD_PARSER_SUPPORT=y
+# ALIASCMD_SUPPORT is not set
+# ECMD_PAM_SUPPORT is not set
+# ECMD_SCRIPT_SUPPORT is not set
+ECMD_SCRIPT_MAX_VARIABLES=4
+ECMD_SCRIPT_VARIABLE_LENGTH=10
+ECMD_SCRIPT_COMPARATOR_LENGTH=25
+ECMD_SCRIPT_MAXLINES=128
+ECMD_SERIAL_USART_SUPPORT=y
+ECMD_SERIAL_USART_USART_0=y
+ECMD_SERIAL_USART_USE_USART=0
+# ECMD_SERIAL_USART_RS485_SUPPORT is not set
+ECMD_SERIAL_BAUDRATE=115200
+ECMD_SERIAL_USART_BUFFER_LEN=50
+ECMD_TCP_SUPPORT=y
+ECMD_TCP_PORT=2701
+# ECMD_UDP_SUPPORT is not set
+# ECMD_SERIAL_I2C_SUPPORT is not set
+# ECMD_USB_SUPPORT is not set
+# ECMD_JABBER_SUPPORT is not set
+# ECMD_IRC_SUPPORT is not set
+# ECMD_SMS_SUPPORT is not set
+# ECMD_SENDER_SUPPORT is not set
+# UECMD_SENDER_SUPPORT is not set
+# DISABLE_IPCONF_SUPPORT is not set
+# DISABLE_REBOOT_SUPPORT is not set
+# IPSTATS_SUPPORT is not set
+# FREE_SUPPORT is not set
+# DEBUG_ECMD is not set
+# DEBUG_ECMD_FS20 is not set
+# DEBUG_ECMD_IP is not set
+# DEBUG_ECMD_MAC is not set
+# DEBUG_ECMD_NET is not set
+# DEBUG_ECMD_OW_LIST is not set
+# DEBUG_ECMD_OW_ROM is not set
+# DEBUG_ECMD_PORTIO is not set
+# DEBUG_ECMD_RC5 is not set
+# DEBUG_ECMD_SCRIPT is not set
+# IRC_SUPPORT is not set
+CONF_IRC_IP="192.168.23.254"
+CONF_IRC_PORT=6667
+CONF_IRC_CHANNEL="ethersex"
+CONF_IRC_USERNAME="ethersex"
+CONF_IRC_NICKNAME="ethersex"
+CONF_IRC_REALNAME="Ethersex Wollmilchsau"
+# IRC_GREET_SUPPORT is not set
+# DEBUG_IRC is not set
+# MDNS_SD_SUPPORT is not set
+# MODBUS_SUPPORT is not set
+# MYSQL_SUPPORT is not set
+CONF_MYSQL_IP="192.168.23.254"
+CONF_MYSQL_USERNAME="root"
+CONF_MYSQL_PASSWORD="password"
+CONF_MYSQL_SCHEMA="mavisdb"
+# DEBUG_MYSQL is not set
+# NETSTAT_SUPPORT is not set
+CONF_NETSTAT_SERVICE_IP="188.40.33.175"
+CONF_NETSTAT_SERVICE="ethersex.de"
+CONF_NETSTAT_API="/~habo/stat/"
+# DEBUG_NETSTAT is not set
+# SOAP_SUPPORT is not set
+# SNMP_SUPPORT is not set
+# SENDMAIL_SUPPORT is not set
+CONF_SENDMAIL_IP="78.47.210.246"
+CONF_SENDMAIL_FROM="root@sex.metafnord.de"
+CONF_SENDMAIL_TO="stesie@brokenpipe.de"
+# SENDMAIL_AUTH_SUPPORT is not set
+# DEBUG_SENDMAIL is not set
+# SMS77_SUPPORT is not set
+CONF_SMS77_SERVICE="gateway.sms77.de"
+CONF_SMS77_USER=""
+CONF_SMS77_PASS=""
+CONF_SMS77_TO=""
+# SMS77_EEPROM_SUPPORT is not set
+# DEBUG_SMS77 is not set
+# SYSLOG_SUPPORT is not set
+CONF_SYSLOG_SERVER="192.168.23.73"
+# TWITTER_SUPPORT is not set
+CONF_TWITTER_SERVICE="identi.ca"
+CONF_TWITTER_API="/api"
+CONF_TWITTER_USERNAME="ethersex"
+CONF_TWITTER_PASSWORD=""
+CONF_TWITTER_AUTH="ZXRoZXJzZXg6"
+# DEBUG_TWITTER is not set
+# USTREAM_SUPPORT is not set
+CONF_USTREAM_IP="205.188.234.7"
+CONF_USTREAM_PORT=80
+# DEBUG_USTREAM is not set
+# YPORT_SUPPORT is not set
+YPORT_USART_0=y
+YPORT_PORT=7970
+YPORT_BAUDRATE=115200
+# MSR1_SUPPORT is not set
+MSR1_USART_0=y
+# DEBUG_MSR1 is not set
+# TO1_SUPPORT is not set
+TO1_USART_0=y
+TO1_SENSOR_COUNT=1
+# DEBUG_TO1 is not set
+# NMEA_SUPPORT is not set
+NMEA_USART_0=y
+
+#
+# Applications
+#
+# APP_SAMPLE_SUPPORT is not set
+# APP_SAMPLE_INIT_AUTOSTART_SUPPORT is not set
+# APP_SAMPLE_PERIODIC_AUTOSTART_SUPPORT is not set
+# DEBUG_APP_SAMPLE is not set
+# CLOCK_SUPPORT is not set
+# CLOCK_DATETIME_SUPPORT is not set
+# CLOCK_CRYSTAL_SUPPORT is not set
+# CLOCK_NTP_ADJUST_SUPPORT is not set
+# DCF77_SUPPORT is not set
+# DEBUG_DCF77 is not set
+# NTP_SUPPORT is not set
+# NTPD_SUPPORT is not set
+# WHM_SUPPORT is not set
+# DEBUG_NTP_ADJUST is not set
+# CRON_SUPPORT is not set
+# CRON_DEFAULT_UTC is not set
+# CRON_SUPPORT_TEST is not set
+# DEBUG_CRON_DRYRUN is not set
+# DEBUG_CRON is not set
+# CRON_STATIC_SUPPORT is not set
+# DYNDNS_SUPPORT is not set
+# UDP_ECHO_NET_SUPPORT is not set
+# WOL_SUPPORT is not set
+HTTPD_SUPPORT=y
+# HTTPD_SOAP_SUPPORT is not set
+# HTTPD_AUTH_SUPPORT is not set
+# HTTP_SD_DIR_SUPPORT is not set
+# MIME_SUPPORT is not set
+HTTPD_PORT=80
+HTTPD_ALTERNATE_PORT=8000
+# DEBUG_HTTPD is not set
+# JABBER_SUPPORT is not set
+CONF_JABBER_IP="78.47.210.246"
+CONF_JABBER_HOSTNAME="jabber.zerties.org"
+CONF_JABBER_USERNAME="esex"
+CONF_JABBER_PASSWORD="password"
+CONF_JABBER_RESOURCE="ethersex"
+CONF_JABBER_BUDDY="stesie@jabber.zerties.org"
+# DEBUG_JABBER is not set
+# MOODLIGHT_SUPPORT is not set
+MOODLIGHT_THRESHOLD_INIT=120
+# MOODLIGHT_START_ONBOOT is not set
+# STELLA_SUPPORT is not set
+# STELLA_HIGHFREQ is not set
+STELLA_START=stella_start_zero
+stella_start_zero=y
+# stella_start_all is not set
+# stella_start_eeprom is not set
+STELLA_FADE_STEP_INIT=10
+STELLA_FADE_FUNCTION_INIT=stella_fade_func_0
+stella_fade_func_0=y
+# stella_fade_func_1 is not set
+# DEBUG_STELLA is not set
+# TFTP_SUPPORT is not set
+# TFTPOMATIC_SUPPORT is not set
+# UPNP_SUPPORT is not set
+CONF_UPNP_MULTICAST_IP="239.255.255.250"
+CONF_UPNP_SCHEME_FILENAME="/ih.xml"
+# DEBUG_UPNP is not set
+# WATCHCAT_SUPPORT is not set
+# RFM12_SUPPORT is not set
+IPV4_SUPPORT=y
